LISY300AL Single-Axis Gyro with ±300°/s Range

Pololu item #: 765

This product has been discontinued.

Suggested replacement: L3GD20 3-axis gyro.

This gyroscope board is a basic carrier/breakout board for the ST LISY300AL single-axis gyro, which measures rotational motion about the yaw (z) axis with a ±300°/s range and outputs an analog voltage. This board has a 3.3V regulator for easy integration with 5V parts, includes a low-pass filter for noise reduction, and is smaller than competing products, all at a lower price.

 Description Specs (7) Pictures (2) Resources (1) FAQs (0) On the blog (0) 


Size: 0.7" x 0.7"
Weight: 1.3 g1

General specifications

Minimum operating voltage: 2.7 V2
Maximum operating voltage: 16 V3
Axes: yaw (z)
Measurement range: ±300°/s
Sensitivity: 3.3 mV/(°/s)


Without included hardware.
Voltages below 3.6 V should be connected directly to the Vdd pin.
Internally regulated to 3.3 V.

Related Products

LPY510AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ±100°/s and ±400°/s Ranges
LPR510AL Dual-Axis (Pitch and Roll or XY) Gyro with ±100°/s and ±400°/s Ranges
LPY550AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ±500°/s and ±2000°/s Ranges
LPR550AL Dual-Axis (Pitch and Roll or XY) Gyro with ±500°/s and ±2000°/s Ranges
MMA7361LC 3-Axis Accelerometer ±1.5/6g
MMA7341LC 3-Axis Accelerometer ±3/9g
UM6 r2 Ultra-Miniature Orientation Sensor
CHR-6dm Attitude and Heading Reference System
CHR-6d Inertial Measurement Unit
66-Channel LS20031 GPS Receiver Module (MT3339 Chipset)

Related Categories

Accelerometers, Gyros, & Compasses
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors