|
6V, 2.5A Step-Up/Step-Down Voltage Regulator S13V25F6 |
|
Motoron M3H550 Triple Motor Controller for Raspberry Pi (Connectors Soldered) |
|
7.5V, 3A Step-Down Voltage Regulator D30V30F7 |
|
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier) |
|
6V, 3.3A Step-Down Voltage Regulator D30V30F6 |
|
3pi+ 2040 Robot - Turtle Edition (75:1 LP Motors), Assembled |
|
9V, 2.9A Step-Down Voltage Regulator D30V30F9 |
|
5V, 3.4A Step-Down Voltage Regulator D30V30F5 |
|
Motoron M2T550 Dual I²C Motor Controller (Header Pins Soldered) |
|
4.2-15V, 3.3A Fine-Adjust Step-Down Voltage Regulator D30V33MAS |
Brandon's line following robot: The Chariot
- 17 November 2019hi Brandon,
I was really amazed by your line follower and I'm going to built that one I just wanted to know the schematic diagram of the chariot cause I'm little confused about the pinnings and also the code thank you very much!!