|
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier) |
|
Motoron M3H550 Triple Motor Controller for Raspberry Pi (No Connectors or Standoffs) |
|
9V, 2.9A Step-Down Voltage Regulator D30V30F9 |
|
12V, 2.5A Step-Up/Step-Down Voltage Regulator S13V25F12 |
|
7.5V, 2.5A Step-Up/Step-Down Voltage Regulator S13V25F7 |
|
3pi+ 2040 Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit) |
|
ACS724 Current Sensor Carrier -30A to +30A |
|
3.3V, 2.5A Step-Up/Step-Down Voltage Regulator S13V25F3 |
|
Motoron M1U550 Single Serial Motor Controller |
|
3.3V, 3.7A Step-Down Voltage Regulator D30V30F3 |
Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
- 16 February 2017that little tip about connecting the voltmeter TO the metal screwdriver was really a great hack.
I can save an entire hand now !! ha ha