|
298:1 Micro Metal Gearmotor LP 6V with 12 CPR Encoder, Side Connector |
|
Motoron M1T550 Single I²C Motor Controller (Header Pins Soldered) |
|
6V, 2.5A Step-Up/Step-Down Voltage Regulator S13V25F6 |
|
75:1 Micro Metal Gearmotor HP 6V with 12 CPR Encoder, Back Connector |
|
3.3V Step-Up/Step-Down Voltage Regulator S8V9F3 |
|
7.5V, 3A Step-Down Voltage Regulator D30V30F7 |
|
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier) |
|
4.2-15V, 3.3A Fine-Adjust Step-Down Voltage Regulator D30V33MAS |
|
Motoron M3S550 Triple Motor Controller Shield Kit for Arduino |
|
Zumo 2040 Robot (Assembled with 50:1 HP Motors) |
New revision of the Dual VNH5019 motor driver shield for Arduino
- 29 February 2016I see. Thanks
New revision of the Dual VNH5019 motor driver shield for Arduino
- 24 February 2016Note #2 shows : Not recommend for 24V battery.
I have 24v motors. What will happen if I use this driver on 24V battery?
Thanks