|
Ribbon Cable Premium Jumper Wires 10-Color F-F 36" (90 cm) |
|
75:1 Micro Metal Gearmotor HP 6V with 12 CPR Encoder, Back Connector |
|
4.2-15V, 3.3A Fine-Adjust Step-Down Voltage Regulator D30V33MAS |
|
6V, 3.3A Step-Down Voltage Regulator D30V30F6 |
|
MinIMU-9 v6 Gyro, Accelerometer, and Compass (LSM6DSO and LIS3MDL Carrier) |
|
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier) |
|
Motoron M2U550 Dual Serial Motor Controller (Header Pins Soldered) |
|
Motoron M3S550 Triple Motor Controller Shield for Arduino (No Connectors) |
|
Motoron M1T550 Single I²C Motor Controller |
|
LPS22DF Pressure/Altitude Sensor Carrier with Voltage Regulator |
Understanding battery capacity: Ah is not A
- 12 December 2015My sincerest apologies LOL But after reading your very informative article, I am still left in the dark over one key question...(I most likely simply did not comprehend an explanation that you already gave). Using an online calculator which converts MAh to Wh, If I put in 51,000 mah @ 12 volts I get a total of 612 WH, and yet If I use the same mah,(51.000), @ 5 volts I only get 215 wh......Why do I get less wh at lower voltage and more wh at higher voltage? Hopefully you can assist with this LOL. Thanks in advance.