New products: QTR-3A and QTR-3RC Reflectance Sensor Arrays

Posted by Kevin on 1 August 2013
Tags: new products

Our new QTR-3A and QTR-3RC reflectance sensor arrays pack three IR emitter and receiver (phototransistor) pairs onto a board measuring just 1.25″ × 0.3″ (32 mm × 8 mm). With the sensors mounted on a 0.375″ pitch, these sensor arrays are great for sensing 3/4″ black electrical tape when used as minimal detectors on line-following robots!

Two versions of these sensor modules are available: the QTR-3A provides three analog voltage outputs, while the QTR-3RC provides three digital pulse signals that can be read with digital I/O lines.

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

ACS72981LLRATR-050U5 Current Sensor Compact Carrier 0A to 50A, 5V
A5984 Stepper Motor Driver Carrier, Fixed 1.5A@5V / 1A@3.3V, Blue Edition
Pololu Digital Distance Sensor, 100cm, Side-Entry Connector
3.3V, 100mA Step-Down Voltage Regulator D45V1E2F3
Pololu Ideal Diode Reverse Voltage Protector, 4-60V, 10A
ACS37041KLHBLT-030B5 Current Sensor Compact Carrier -30A to +30A, 5V
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block, 240VRMS Jumper)
JST PH-Style Cable with Female Pins for 0.1" Housings, 3-Pin, 75cm
CT220RMV-HS5 Contactless Current Sensor Carrier ±15mT/150G
ACS72981ELRATR-200B3 Current Sensor Compact Carrier -200A to +200A, 3.3V
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors