Automatic Infrared Light Source Tracking HD Camcorder

Posted by Ben on 26 February 2010

In this project, an HD camcorder sits on a pan/tilt mount controlled by a Micro Maestro 6-Channel USB Servo Controller. A Wiimote is used to track an IR light source. Here is a video taken from the mounted camcorder:

Featured link: http://helifreak.com/showthread.php?p=1868143#post1868143

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

12V, 100mA Step-Down Voltage Regulator D45V1E2F12
Pololu Isolated Solid State Relay/Switch, SPST, 30V, 11A
ACS37030LLZATR-040B3 Current Sensor Compact Carrier -40A to +40A, 3.3V
3.3V, 500mA Step-Down Voltage Regulator D45V5F3
A5984 Stepper Motor Driver Carrier, Adjustable Current, Blue Edition (Soldered Header Pins)
JST SH-Style Cable, 4-Pin, Single-Ended Female, 12cm
CT433-HSWF20DR TMR Current Sensor Compact Carrier 0A to 20A, 3.3V
RobustMotion RM-EGB Series 24VDC Compact Finger Gripper, 20D, PNP + RS-485 Interface
ACS37030LLZATR-020B3 Current Sensor Compact Carrier -20A to +20A, 3.3V
Pololu RC Switch with Isolated Solid State Relay/Switch, SPST, 30V, 10A (Soldered Connectors)
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors