Glideforce MD122008-P Medium-Duty Linear Actuator with Feedback: 100kgf, 8" Stroke (7.8" Usable), 0.58"/s, 12V
This 12 V medium-duty (MD) linear actuator can lift loads up to 100 kgf [225 lbs or 1000 N] and can withstand static loads up to 450 kgf [1000 lbs or 4500 N]. It has a maximum speed of 14.7 mm/s [0.58″/s] at no load and 10.4 mm/s [0.41″/s] at the maximum load. Limit switches at each end make the actuator easy to control over its full range of motion. The shaft holds its position when unpowered. This version has an 8-inch stroke (7.8″ usable) and a feedback potentiometer that lets you determine where the actuator is in its stroke.
Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included?
|Description||Specs (18)||Pictures (9)||Resources (3)||FAQs (0)||On the blog (0)|
Glideforce Medium-Duty (MD) series of linear actuators.
Glideforce Medium-Duty (MD) series of linear actuators with feedback.
Connectors that terminate the cable ends of Glideforce Medium-Duty (MD) linear actuators with feedback.
Dimensions of Glideforce MD linear actuators with feedback. Units are mm.
Glideforce Medium-Duty (MD) series of linear actuators without feedback.
Unterminated wire ends for Glideforce Medium-Duty (MD) linear actuators without feedback.
Dimensions of Glideforce MD linear actuators without feedback. Units are mm.
Glideforce MD122004 medium-duty linear actuator (4″ stroke) with shaft fully extended.
Connecting a medium-duty linear actuator with feedback to a Jrk 24v13 motor controller.