Raspberry Pi 1 Model A+ 512MB

Pololu item #: 2760
Brand: Raspberry Pi
Status: Discontinued at Pololu 
RoHS 3 compliant

This product has been discontinued.

The Raspberry Pi is a credit card-sized computer with an ARM processor that can run Linux. This item is the Raspberry Pi 1 Model A+ 512MB, which has 512 MB of RAM, an HDMI output, audio output, RCA composite video output (through the 3.5 mm jack), one USB port, and 0.1″-spaced pins that provide access to general purpose inputs and outputs (GPIO). The Model A Raspberry Pis are smaller and less expensive than the Model B Raspberry Pis. The Raspberry Pi requires a microSD card with an operating system on it (not included). The Raspberry Pi is very popular, with lots of example projects and information available online.

 Description Specs (4) Pictures (6) Resources (10) FAQs (0) On the blog (4) 

Raspberry Pi 1 Model A+.

Raspberry Pi 1 Model A+.

Raspberry Pi 1 Model A+, bottom view.

Raspberry Pi 1 Model A+, top view.

Driving motors with an A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge on a on a Raspberry Pi Model A+.

Raspberry Pi Model A+, B+, and 2 B GPIO header pinout diagram.


Related Products

USB Cable A to Micro-B, 6 ft
Pololu 5V, 5A Step-Down Voltage Regulator D24V50F5
Pololu 5V, 2.5A Step-Down Voltage Regulator D24V25F5
A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge
A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
Pololu Dual G2 High-Power Motor Driver 18v22 for Raspberry Pi (Partial Kit)
Pololu Dual MC33926 Motor Driver for Raspberry Pi (Assembled)
Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi
Logic Level Shifter, 4-Channel, Bidirectional
Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Stackable 0.100″ Female Header: 2x20-Pin, Straight
0.100" (2.54 mm) Female Header: 2x20-Pin, Straight
Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-Pin, Straight
Machine Screw: M2.5, 6mm Length, Phillips (25-pack)
Machine Hex Nut: M2.5 (25-pack)

Related Categories

Raspberry Pi
Raspberry Pi Expansion Boards
Development Boards (Programmable Controllers)
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Sensors
Electronics Prototyping
Solderless Breadboards
LEDs
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors