Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (old version)

Pololu item #: 2598

This product has been discontinued.

This has been replaced by a functionally identical new version with enlarged the motor terminal holes that are compatible with all our micro metal gearmotors (including the newer HPCB ones).

Add quadrature encoders to your LP, MP, or HP micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.

Note: This version is not compatible with the HPCB micro metal gearmotors; it is only compatible with LP, MP, and HP dual-shaft micro metal gearmotors.

 Description Specs (6) Pictures (12) Resources (5) FAQs (0) On the blog (2) 

Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (old version).

Magnetic Encoder Kit for Micro Metal Gearmotors assembled on a micro metal gearmotor with extended motor shaft.

Magnetic Encoder Kit for Micro Metal Gearmotors assembled on a micro metal gearmotor with extended motor shaft.

Magnetic Encoder Kit for Micro Metal Gearmotors assembled on a micro metal gearmotor with extended motor shaft.

Magnetic Encoder Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (old version), motor-side view of PCB with dimensions

Magnetic Encoder Kit for Micro Metal Gearmotors (old version), magnet-side view of PCB with labeled pinout.

Magnetic Encoder Kit for Micro Metal Gearmotors (old version), motor-side view of PCB.

Magnetic Encoder on a Micro Metal Gearmotor with Extended Motor Shaft, assembled with ribbon cable wires.

Magnetic Encoder Kit for Micro Metal Gearmotors assembled with 2mm-pitch male header pins installed over the motor.

Magnetic Encoder Kit for Micro Metal Gearmotors assembled with 2mm-pitch male header pins installed over the magnetic disc.

Encoder A and B outputs of a magnetic encoder on a high-power (HP) 6V Micro Metal Gearmotor running at 6 V.

Magnetic Encoder Kit for Micro Metal Gearmotors schematic diagram.


Related Products

10:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft
298:1 Micro Metal Gearmotor LP 6V with Extended Motor Shaft
Magnetic Encoder Disc for Micro Metal Gearmotors, OD 7.65 mm, ID 1.0 mm, 12 CPR (Bulk)
Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V
Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V
Magnetic Encoder Pair Kit for Mini Plastic Gearmotors, 12 CPR, 2.7-18V
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V

Related Categories

Encoders for Micro Metal Gearmotors
Micro Metal Gearmotors with Extended Motor Shafts
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors