Generic Linear Actuator: 4" Stroke, 12V, 1.5"/s

Pololu item #: 2344

This product has been discontinued.

For alternatives, please consider the Concentric LD series linear actuators.

This 12 V linear actuator has a load rating of 22 lbs (10 kg) and a maximum speed of 1.5 in/s (40 mm/s). Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has a 4-inch stroke and no potentiometer.

Alternatives available with variations in these parameter(s): nominal stroke length feedback potentiometer included? linear speed @ 12V, no load Select variant…

 Description Specs (7) Pictures (6) Resources (1) FAQs (1) On the blog (0) 
What are the differences between the generic linear actuators and Concentric linear actuators?

The Concentric actuators are very similar to our generic actuators, but they differ in a few ways:

  • The Concentric actuators use different gearboxes to offer different combinations of speed and force while the generic ones use the same gearboxes but different threading pitch on the drive rod.
  • The feedback on the Concentric actuators with feedback pots is better than on the generics in the sense that nearly the full range of the feedback pot is used. On the generic actuators, typically only a subset of the feedback pot range is used (e.g. 10% for the 4" version). This is probably the main way in which the Concentric actuators are better.
  • Concentric actuators have a recommended maximum duty cycle of 25%; the generic actuators have a recommended maximum duty cycle of 15%.
  • Concentric actuators have a static load rating significantly higher than their dynamic load ratings; the generic actuators just have dynamic load ratings, and we do not recommend exceeding those.
  • A generic actuator is less expensive than the comparable Concentric actuator.

Related Products

Mounting Bracket for Generic Linear Actuators
Glideforce LACT2-12V-20 Light-Duty Linear Actuator: 50kgf, 2" Stroke (1.97" Usable), 0.57"/s, 12V
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Pololu Simple Motor Controller 18v7 (Fully Assembled)
Jrk 21v3 USB Motor Controller with Feedback
Jrk 12v12 USB Motor Controller with Feedback
MC33926 Motor Driver Carrier
VNH5019 Motor Driver Carrier

Related Categories

Generic Linear Actuators
Glideforce Light-Duty (LD) Linear Actuators
Linear Actuators
Pololu Jrk Motor Controllers with Feedback
Brushed DC Motor Controllers
Brushed DC Motor Drivers
Motors and Gearboxes
RC Servos
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors