MPL3115A2 Altitude/Pressure Sensor Breakout Board

MPL3115A2 Altitude/Pressure Sensor Breakout Board
Pololu item #: 2189 0 in stock

This product has been discontinued.

This product has been replaced by the LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator.

This is a simple breakout board from SparkFun for the MPL3115A2 precision altimeter. The MPL3115A2 offers a measuring range of 50 to 110 kPa with an absolute accuracy of down to 0.4 kPa. It has an altitude resolution down to 30 cm. This board should be powered with 1.95 and 3.6 V, and is designed to be connected to a microcontroller via I²C.

 Description Specs (8) Pictures (3) Resources (4) FAQs (0) On the blog (0) 

Dimensions

Size: 0.6" × 0.7"
Weight: 1 g

General specifications

Resolution: 0.0015 kPa
Minimum operating voltage: 1.95 V
Maximum operating voltage: 3.6 V
Minimum logic voltage: 1.6 V
Maximum logic voltage: 3.6 V
Measurement range: 20 kPa to 110 kPa1

Notes:

1
Calibrated range is 50 kPa to 110 kPa.

Related Products

LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
BMP085 Barometric Pressure Sensor Breakout Board
HIH-4030 Humidity Sensor Carrier
MLX90614ESF-AAA Infrared Temperature Sensor 90° FOV
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x6-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x6-Pin 10-Pack
Pololu Step-Down Voltage Regulator D24V3ALV

Related Categories

Premium Jumper Wires
Sensors
Wires with Pre-crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors