Electronics » Cables and Wire » Servo Cables »
Twisted Servo Y Splitter Cable 12" Female - 2x Male
This 12-inch (300-mm), twisted Y-cable is typically used to connect two servos to a single servo port . It has 22-AWG wires terminated on one end by a “JR”-style female connector and on the other by two Futaba J male connectors, allowing it to work in either system or as an adapter between systems. The split occurs close to the cable’s JR input, so the two male ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).
Alternatives available with variations in these parameter(s): style Select variant…
|Description||Specs (3)||Pictures (4)||Resources (0)||FAQs (0)||On the blog (0)|
Servo Y splitter cable female – 2x male, fully extended.
Twisted servo Y splitter cable 12" female – 2x male, fully extended.
Female “JR”-style connector commonly found on servo cables (often referred to as “male” in the RC hobby industry).
Male Futaba J connector (often referred to as “female” in the RC hobby industry).