The 1207TG is a premium servo from Power HD with a standard-size footprint but a very low height, resulting in a unique low profile that reduces weight and allows use in applications with tight space constraints. It has a coreless motor with an all-metal gear train, digital control electronics, and two ball bearings on the output shaft. Servo horns and associated hardware are included.
Key specs at 6 V: 0.09 sec/60°, 110 oz-in (8 kg-cm ), 48 g.
|Description||Specs (9)||Pictures (5)||Resources (1)||FAQs (2)||On the blog (0)|
The HD-1207TG is a premium servo that is set apart by its unique, low-profile shape. Despite its reduced size and weight, the 1207TG offers the kind of performance usually only found in heavier standard-size servos, which makes it great for applications with tight space or weight constraints. The picture on the right shows how the 1207TG compares to our popular 1501MG standard-size servo.
Digital electronics combined with a coreless motor, titanium-shielded aluminum gears, and two ball bearings give this servo a distinct edge over typical standard-size servos. The 1207TG works with standard RC pulses at frequencies up to 333 Hz. The 12″ (300 mm) lead is terminated with a standard “JR”-style connector, which is Futaba-compatible. The picture below shows an example of the hardware that might be included with this servo (hardware might vary).
The pictures below show the all-metal (copper and aluminum) gear train and ball bearings.
|Copper and aluminum gears and ball bearings of the Power HD digital servo 1207TG.|
You can find more information about this servo under the specifications tab and in its datasheet (364k pdf).
Note that, as with most hobby servos, stalling or back-driving this servo can strip its gears.