The HD-1160A is an inexpensive, general-purpose miniature analog servo from Power HD. Servo horns and associated hardware are included.
Key specs at 6 V: 0.11 sec/60°, 37 oz-in (2.7 kg-cm), 16 g.
|Description||Specs (11)||Pictures (1)||Resources (1)||FAQs (2)||On the blog (1)|
The HD-1160A is one of our most popular miniature servos. It is an inexpensive, general-purpose actuator for small mechanisms that require a bit more torque than you can get out of micro and sub-micro servos. The lead is terminated with a standard “JR”-style connector, which is Futaba-compatible. Mounting screws and an assortment of servo horns is included with this servo. The picture below shows an example of this included hardware (hardware might vary).
|An example of hardware included with the Power HD mini servo HD-1160A. Actual hardware might vary.|
Note: The disk servo horn is no longer included with this servo.
You can find more information about this servo under the specifications tab and in its datasheet (171k pdf).
Note that, as with most hobby servos, stalling or back-driving this servo can strip its gears.
People often buy this product together with:
|Micro Maestro 6-Channel USB Servo Controller (Assembled)|
|Power HD Standard Servo 3001HB|
|Power HD High-Torque Servo 1501MG|