Pololu distributor: Ipower Electronics (Mexico)

Contact information

Distributor website

ipowerelectronics.com

Purchased products

This distributor has ordered 197 different Pololu products over the last year; see the distributor website for availability. Here is the list of purchased products:

#117 3-Pin Female JST PH-Style Cable (30 cm) for Sharp Distance Sensors
#642 Solarbotics RW2 Wheel (external set screw)
#854 Shrouded Box Header: 2×3-Pin, 0.100" (2.54 mm) Male
#855 IDC socket: 2x3-Pin, 0.100" (2.54 mm) Female
#898 Shrouded Box Header: 2×8-Pin, 0.100" (2.54 mm) Male
#925 T Connector Male-Female Pair
#960 QTR-8A Reflectance Sensor Array
#961 QTR-8RC Reflectance Sensor Array
#965 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
#966 0.100" (2.54 mm) Breakaway Male Header: 2×40-Pin, Straight
#967 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
#968 0.100" (2.54 mm) Shorting Block: Blue, Top Closed
#969 0.100" (2.54 mm) Shorting Block: Yellow, Top Closed
#970 0.100" (2.54 mm) Shorting Block: Black, Top Closed
#971 0.100" (2.54 mm) Shorting Block: Red, Top Closed
#998 50:1 Micro Metal Gearmotor HP 6V
#1000 5:1 Micro Metal Gearmotor HP 6V
#1035 Stackable 0.100" Female Header Set for Arduino Shields
#1064 Hex (Allen) Wrench 0.05"
#1065 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Double-Sided
#1067 Machine Hex Nut: #2-56 (25-pack)
#1068 Machine Hex Nut: #4-40 (25-pack)
#1069 Machine Hex Nut: M3 (25-pack)
#1070 T1 (3mm) Red LED with Red Diffused Lens
#1071 T1 (3mm) Green LED with Green Diffused Lens
#1072 T1 (3mm) Yellow LED with Yellow Diffused Lens
#1075 Machine Screw: M3, 5mm Length, Phillips (25-pack)
#1076 Machine Screw: M3, 8mm Length, Phillips (25-pack)
#1077 Machine Screw: M3, 25mm Length, Phillips (25-pack)
#1081 Pololu Universal Aluminum Mounting Hub for 4mm Shaft, #4-40 Holes (2-Pack)
#1088 Pololu Wheel 32×7mm Pair - White
#1113 0.100" (2.54 mm) Extended Male Header: 2×7-Pin, 17.1 mm
#1114 0.100" (2.54 mm) Extended Male Header: 1×2-Pin, 22.85 mm
#1115 0.100" (2.54 mm) Extended Male Header: 2×7-Pin, 22.85 mm
#1139 DC Power Adapter Barrel Jack
#1182 A4988 Stepper Motor Driver Carrier
#1183 A4988 Stepper Motor Driver Carrier with Voltage Regulators
#1350 Micro Maestro 6-Channel USB Servo Controller (Assembled)
#1400 Mini Pushbutton Switch: PCB-Mount, 2-Pin, SPST, 50mA (5-Pack)
#1401 Mini Snap-Action Switch with 13.5mm Lever: 3-Pin, SPDT, 2A
#1402 Snap-Action Switch with 16.7mm Lever: 3-Pin, SPDT, 5A
#1403 Snap-Action Switch with 50mm Lever: 3-Pin, SPDT, 5A
#1404 Snap-Action Switch with 16.3mm Roller Lever: 3-Pin, SPDT, 5A
#1405 Snap-Action Switch with 15.6mm Bump Lever: 3-Pin, SPDT, 5A
#1406 Rocker Switch: 3-Pin, SPDT, 10A
#1408 Mini Slide Switch: 3-Pin, SPDT, 0.3A (3-Pack)
#1418 Zumo Chassis Kit (No Motors)
#1451 VNH5019 Motor Driver Carrier
#1484 9mm Electromagnetic Buzzer: 30Ω, 3-7V, Side Opening
#1485 9mm Electromagnetic Buzzer: 40Ω, 4-6V, Top Opening
#1564 Dagu Wild Thumper 4WD All-Terrain Chassis, Silver, 34:1
#1595 1000:1 Micro Metal Gearmotor HP 6V
#1696 Force-Sensing Resistor: 0.6″-Diameter Circle
#1900 0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack
#1901 0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack
#1902 0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack
#1903 0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack
#1904 0.1" (2.54mm) Crimp Connector Housing: 1x5-Pin 10-Pack
#1905 0.1" (2.54mm) Crimp Connector Housing: 1x6-Pin 10-Pack
#1906 0.1" (2.54mm) Crimp Connector Housing: 1x7-Pin 10-Pack
#1907 0.1" (2.54mm) Crimp Connector Housing: 1x8-Pin 10-Pack
#1908 0.1" (2.54mm) Crimp Connector Housing: 1x9-Pin 5-Pack
#1909 0.1" (2.54mm) Crimp Connector Housing: 1x10-Pin 5-Pack
#1910 0.1" (2.54mm) Crimp Connector Housing: 2x2-Pin 10-Pack
#1911 0.1" (2.54mm) Crimp Connector Housing: 2x3-Pin 10-Pack
#1912 0.1" (2.54mm) Crimp Connector Housing: 2x4-Pin 10-Pack
#1913 0.1" (2.54mm) Crimp Connector Housing: 2x5-Pin 5-Pack
#1914 0.1" (2.54mm) Crimp Connector Housing: 2x6-Pin 5-Pack
#1915 0.1" (2.54mm) Crimp Connector Housing: 2x7-Pin 5-Pack
#1916 0.1" (2.54mm) Crimp Connector Housing: 2x8-Pin 5-Pack
#1917 0.1" (2.54mm) Crimp Connector Housing: 2x10-Pin 5-Pack
#1918 0.1" (2.54mm) Crimp Connector Housing: 2x16-Pin 5-Pack
#1919 0.1" (2.54mm) Crimp Connector Housing: 1x12-Pin 5-Pack
#1920 0.1" (2.54mm) Crimp Connector Housing: 1x16-Pin 5-Pack
#1921 0.1" (2.54mm) Crimp Connector Housing: 2x12-Pin 5-Pack
#1930 Female Crimp Pins for 0.1" Housings 100-Pack
#1934 JST RCY Connector Pack, Female
#1936 Mini Tamiya Connector Pack, Female
#1940 Aluminum Standoff: 1/4" Length, 2-56 Thread, M-F (4-Pack)
#1941 Aluminum Standoff: 3/8" Length, 2-56 Thread, M-F (4-Pack)
#1942 Aluminum Standoff: 1/2" Length, 2-56 Thread, M-F (4-Pack)
#1943 Aluminum Standoff: 3/4" Length, 2-56 Thread, M-F (4-Pack)
#1944 Aluminum Standoff: 1" Length, 2-56 Thread, M-F (4-Pack)
#1945 Aluminum Standoff: 1-1/4" Length, 2-56 Thread, M-F (4-Pack)
#1946 Aluminum Standoff: 1/4" Length, 4-40 Thread, M-F (4-Pack)
#1947 Aluminum Standoff: 3/8" Length, 4-40 Thread, M-F (4-Pack)
#1948 Aluminum Standoff: 1/2" Length, 4-40 Thread, M-F (4-Pack)
#1949 Aluminum Standoff: 3/4" Length, 4-40 Thread, M-F (4-Pack)
#1950 Aluminum Standoff: 1" Length, 4-40 Thread, M-F (4-Pack)
#1951 Aluminum Standoff: 1-1/4" Length, 4-40 Thread, M-F (4-Pack)
#1952 Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
#1953 Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)
#1954 Machine Screw: M1.6, 3mm Length, Phillips (6-pack)
#1955 Machine Screw: #2-56, 1/4″ Length, Phillips (25-pack)
#1956 Machine Screw: #2-56, 5/16″ Length, Phillips (25-pack)
#1957 Machine Screw: #2-56, 7/16″ Length, Phillips (25-pack)
#1958 Machine Screw: #2-56, 1″ Length, Phillips (25-pack)
#1959 Machine Screw: #2-56, 1 1/4″ Length, Phillips (25-pack)
#1960 Machine Screw: #4-40, 1/4″ Length, Phillips (25-pack)
#1961 Machine Screw: #4-40, 5/16″ Length, Phillips (25-pack)
#1962 Machine Screw: #4-40, 1/2″ Length, Phillips (25-pack)
#1963 Machine Screw: #4-40, 1″ Length, Phillips (25-pack)
#1964 Machine Screw: #4-40, 1 1/4″ Length, Phillips (25-pack)
#1965 Machine Screw: #4-40, 3/8″ Length, Phillips (25-pack)
#1966 Machine Screw: #4-40, 3/4″ Length, Phillips (25-pack)
#1967 Machine Hex Nut: M2.5 (25-pack)
#1968 Machine Screw: M2.5, 6mm Length, Phillips (25-pack)
#1969 0.1" (2.54mm) Crimp Connector Housing: 2x13-Pin 5-Pack
#1970 Nylon Spacer: 2mm Length, 4mm OD, 2.7mm ID (50-Pack)
#1971 Nylon Spacer: 4mm Length, 4mm OD, 2.7mm ID (50-Pack)
#1972 Nylon Spacer: 6mm Length, 4mm OD, 2.7mm ID (50-Pack)
#1973 Nylon Spacer: 8mm Length, 4mm OD, 2.7mm ID (50-Pack)
#1974 Nylon Spacer: 10mm Length, 4mm OD, 2.7mm ID (25-Pack)
#1975 Nylon Spacer: 12mm Length, 4mm OD, 2.7mm ID (25-Pack)
#1976 Nylon Spacer: 15mm Length, 4mm OD, 2.7mm ID (25-Pack)
#1977 Nylon Spacer: 20mm Length, 4mm OD, 2.7mm ID (10-Pack)
#1979 Nylon Spacer: 25mm Length, 4mm OD, 2.7mm ID (10-Pack)
#1980 Nylon Spacer: 2mm Length, 5mm OD, 3.3mm ID (50-Pack)
#1981 Nylon Spacer: 4mm Length, 5mm OD, 3.3mm ID (50-Pack)
#1982 Nylon Spacer: 6mm Length, 5mm OD, 3.3mm ID (50-Pack)
#1983 Nylon Spacer: 8mm Length, 5mm OD, 3.3mm ID (50-Pack)
#1984 Nylon Spacer: 10mm Length, 5mm OD, 3.3mm ID (25-Pack)
#1985 Nylon Spacer: 12mm Length, 5mm OD, 3.3mm ID (25-Pack)
#1986 Nylon Spacer: 15mm Length, 5mm OD, 3.3mm ID (25-Pack)
#1987 Nylon Spacer: 20mm Length, 5mm OD, 3.3mm ID (10-Pack)
#1988 Nylon Spacer: 25mm Length, 5mm OD, 3.3mm ID (10-Pack)
#1989 0.1" (2.54mm) Crimp Connector Housing: 2x17-Pin 5-Pack
#1990 0.1" (2.54mm) Crimp Connector Housing: 2x18-Pin 5-Pack
#1991 0.1" (2.54mm) Crimp Connector Housing: 1x20-Pin 5-Pack
#1992 0.1" (2.54mm) Crimp Connector Housing: 2x20-Pin 5-Pack
#1998 Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3 Holes (2-Pack)
#1999 Pololu Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack)
#2080 Aluminum Standoff: 1/8" Length, 2-56 Thread, F-F (4-Pack)
#2081 Aluminum Standoff: 3/16" Length, 2-56 Thread, F-F (4-Pack)
#2082 Aluminum Standoff: 1/4" Length, 2-56 Thread, F-F (4-Pack)
#2083 Aluminum Standoff: 5/16" Length, 2-56 Thread, F-F (4-Pack)
#2084 Aluminum Standoff: 3/8" Length, 2-56 Thread, F-F (4-Pack)
#2086 Aluminum Standoff: 1/8" Length, 4-40 Thread, F-F (4-Pack)
#2087 Aluminum Standoff: 3/16" Length, 4-40 Thread, F-F (4-Pack)
#2088 Aluminum Standoff: 1/4" Length, 4-40 Thread, F-F (4-Pack)
#2089 Aluminum Standoff: 5/16" Length, 4-40 Thread, F-F (4-Pack)
#2090 Aluminum Standoff: 3/8" Length, 4-40 Thread, F-F (4-Pack)
#2091 Aluminum Standoff: 1/2" Length, 4-40 Thread, F-F (4-Pack)
#2092 Aluminum Standoff: 7/16" Length, 4-40 Thread, F-F (4-Pack)
#2158 XT60 Connector Male-Female Pair, Black
#2172 Tamiya Plug with 10cm Leads, Female
#2173 Tamiya Plug with 10cm Leads, Male
#2178 Mini Tamiya Plug with 10cm Leads, Female
#2179 Mini Tamiya Plug with 10cm Leads, Male
#2180 JST RCY Plug with 10cm Leads, Female
#2181 JST RCY Plug with 10cm Leads, Male
#2221 Rechargeable NiMH Battery Pack: 4.8 V, 2200 mAh, 4x1 AA Cells, JR Connector
#2225 Rechargeable NiMH Battery Pack: 7.2 V, 2200 mAh, 3x2 AA Cells, JR Connector
#2241 Rechargeable NiMH Battery Pack: 4.8 V, 350 mAh, 4x1 2/3-AAA Cells, JR Connector
#2245 Rechargeable NiMH Battery Pack: 7.2 V, 350 mAh, 3x2 2/3-AAA Cells, JR Connector
#2411 3-Pin Female JST ZH-Style Cable (30cm) for Sharp GP2Y0A51 Distance Sensors
#2440 Screw Terminal Block: 2-Pin, 5 mm Pitch, Side Entry (4-Pack)
#2441 Screw Terminal Block: 3-Pin, 5 mm Pitch, Side Entry (4-Pack)
#2448 DC Barrel Plug to 2-Pin Terminal Block Adapter
#2449 DC Barrel Jack to 2-Pin Terminal Block Adapter
#2491 Screw Terminal Block: 2-Pin, 0.1″ Pitch, Side Entry (4-Pack)
#2492 Screw Terminal Block: 3-Pin, 0.1″ Pitch, Side Entry (3-Pack)
#2495 Screw Terminal Block: 6-Pin, 0.1″ Pitch, Side Entry
#2507 Pololu Dual VNH5019 Motor Driver Shield for Arduino
#2510 Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors)
#2595 Logic Level Shifter, 4-Channel, Bidirectional
#2663 0.100" (2.54 mm) Low-Profile Male Header: 2×7-Pin, 8.75 mm
#2664 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, White
#2665 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Red
#2666 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Yellow
#2667 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Blue
#2668 0.100" (2.54 mm) Breakaway Male Header: 2×40-Pin, Right Angle
#2678 Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Parallel
#2694 Machine Screw: M3, 6mm Length, Phillips (25-pack)
#2695 Machine Screw: M3, 10mm Length, Phillips (25-pack)
#2696 Machine Screw: M3, 12mm Length, Phillips (25-pack)
#2697 Machine Screw: M3, 14mm Length, Phillips (25-pack)
#2698 Machine Screw: M3, 16mm Length, Phillips (25-pack)
#2699 Machine Screw: M3, 20mm Length, Phillips (25-pack)
#2713 Aluminum Standoff for Raspberry Pi: 11mm Length, 4mm M2.5 Thread, M-F (4-Pack)
#2714 Machine Screw: #2-56, 3/8″ Length, Phillips (25-pack)
#2715 Machine Screw: #2-56, 1/2″ Length, Phillips (25-pack)
#2716 Machine Screw: #2-56, 3/4″ Length, Phillips (25-pack)
#2717 2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight (4-Pack)
#2718 2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle (4-Pack)
#2719 2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Right Angle Extended (4-Pack)
#2720 2.5 mm JST XH-Style Shrouded Male Connector: 5-Pin, Straight (2-Pack)
#2721 2.5 mm JST XH-Style Shrouded Male Connector: 5-Pin, Right Angle (2-Pack)
#2722 2.5 mm JST XH-Style Shrouded Male Connector: 5-Pin, Right Angle Extended (2-Pack)
#2732 MyoWare Muscle Sensor
#2733 Electrodes for MyoWare Muscle Sensors (6-Pack)
#2826 100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder
#3126 Zumo 32U4 Robot (Assembled with 75:1 HP Motors)
#3203 20.4:1 Metal Gearmotor 25Dx50L mm HP 12V
#3207 99:1 Metal Gearmotor 25Dx54L mm HP 12V
#3435 Mounting Bracket for Standard-Size Servos
#3575 Balboa 32U4 Balancing Robot Kit (No Motors or Wheels)

New Products

Log In

(702) 262-6648
Same-day shipping, worldwide