0.1″ (2.54 mm) Screw Terminal Blocks

These side-entry terminal blocks have terminals that hold and release wires through the simple adjustment of a small screw, allowing you to easily make temporary connections to a PCB. They have a pitch of 0.1″ (2.54 mm), so they can be used with prototyping boards and PCB holes intended for standard 0.1″ male and female headers (if there is sufficient clearance from nearby components).

Nine sizes are available, from 2 terminals through 10 terminals.

Products in category “0.1″ (2.54 mm) Screw Terminal Blocks”

Pololu item #: 2491
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has two terminals for the stripped ends of 26 – 18 AWG wires. They are rated for 150 V, 6 A and ship in packs of four.

Pololu item #: 2492
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has three terminals for the stripped ends of 26 – 18 AWG wires. They are rated for 150 V, 6 A and ship in packs of three.

Pololu item #: 2493
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has four terminals for the stripped ends of 26 – 18 AWG wires. They are rated for 150 V, 6 A and ship in packs of two.

Pololu item #: 2494
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These side-entry screw terminal blocks have a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. Each block has five terminals for the stripped ends of 26 – 18 AWG wires. They are rated for 150 V, 6 A and ship in packs of two.

Pololu item #: 2495
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has six terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

Pololu item #: 2496
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has seven terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

Pololu item #: 2497
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has eight terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

Pololu item #: 2498
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has nine terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

Pololu item #: 2499
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has ten terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.

Related Products

Wire Stripper 20-30 AWG Solid (22-32 AWG Stranded)
Wire Stripper 10-20 AWG Solid (12-22 AWG Stranded)
Hakko FX-888D Digital Soldering Station

Related Categories

Terminal Blocks
Stackable Screw Terminal Blocks
Screwless Terminal Blocks
Connectors
Soldering and Desoldering Tools
0.1″ (2.54 mm) Female Headers
0.1″ (2.54 mm) Male Headers
Cables and Wire
Prototyping PCBs
Solderless Breadboards
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors