Save 15% on “active” status Pololu-brand products using code MEMORIALDAY26

ISO652x 2-Channel Digital Isolator Carriers

These breakout boards for the 2-channel ISO652x functional isolators from Texas Instruments enable digital communication between two galvanically (electrically) isolated devices at up to 50 Mbps per channel. This isolation means that current cannot flow from one side to the other, and incorrect connections or bad voltages on one side cannot propagate through to damage the device on the other side. It also means the logic voltage can be at different levels on the two sides, allowing these carrier boards to function as level shifters.

The four IC versions feature different combinations of channel directions and default output behavior as shown in the table below:

Pololu
Item #
IC part
number
Default
output
Channels Max data
rate
Working
voltage 1
Min PCB
Creepage 2
Size Price

ISO652x
carrier
#5746 ISO6520 high 2 forward,
0 reverse
50 Mbps 450 VRMS 2.8 mm 0.4″×0.4″ $1.95
#5747 (coming soon) ISO6520F low
#5748 ISO6521 high 1 forward,
1 reverse
#5749 (coming soon) ISO6521F low
Note 1: IC component functional isolation rating per manufacturer datasheet.
Note 2: Minimum creepage along PCB surface based on layout design only. Other creepage distances, e.g. along the body of the component, may be lower.

Pinouts of the ISO652x 2-Channel Digital Isolator Carrier series.

Products in category “ISO652x 2-Channel Digital Isolator Carriers”

Pololu item #: 5746
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

This module is a carrier board for TI’s ISO6520 general purpose functional isolator, which enables two channels of galvanically isolated digital communication between two devices at up to 50 Mbps per channel. Both channels are in the forward direction, and they default to high in the event of input power or signal loss.

Pololu item #: 5748
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

This module is a carrier board for TI’s ISO6521 general purpose functional isolator, which enables two channels of galvanically isolated digital communication between two devices at up to 50 Mbps per channel. It provides one forward channel and one reverse channel, and they default to high in the event of input power or signal loss.

Related Products

0.100″ (2.54 mm) Breakaway Male Header: 1×4-Pin, Straight, Black, 50-Pack
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

Isolation
ISO654x 4-Channel Digital Isolator Carriers
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Solderless Breadboards
Electronics Prototyping
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors