|
JST PH-Style Cable with Female Pins for 0.1" Housings, 3-Pin, 75cm |
|
JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (10-Pack) |
|
JST SH-Style Cable, 4-Pin, Female-Female, 63cm |
|
Glideforce GF01-122110-1-66 Micro Linear Actuator with Limit Switches: 12V, 8.1kgf, 6mm/s, 100mm Stroke |
|
Pololu Digital Distance Sensor, 25cm, Side-Entry Connector |
|
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block) |
|
Glideforce GF01-122110-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 8.1kgf, 6mm/s, 100mm Stroke |
|
Pololu Basic SPDT Relay Carrier with 5VDC Relay, Terminal Blocks, and JST SH-Style Top-Entry Connector |
|
JST SH-Style Cable, 2-Pin, Female-Female, 10cm |
|
QTRX-MD-01A-S Reflectance Sensor: 1-Channel, 8mm Wide, Analog Output, Low Current, Side-Entry Connector |
New products: G2 High-Power Motor Driver 18v25 and 24v21 (and price drops for other G2 drivers)
- 1 April 2016Is the gate driver being used on this board, by any chance, the DRV8701?