Pololu Blog » User Profile: Daniel V. »

Comments by Daniel V.

Nathan's line following robot: Suckbot
- 7 July 2015
Hi, may I ask what were the results of the battery duration with the 500 mAh and 1,300mAh battery?, and it would be interesting to see the robot running, thanks in advance.

	ACS37030LLZATR-040B3 Current Sensor Large Carrier -40A to +40A, 3.3V
	Breakout for JST SH-Style Connector, 4-Pin Male Top-Entry (2-Pack)
	Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH
	JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
	ACS37041KLHBLT-010B3 Current Sensor Micro Carrier -10A to +10A, 3.3V
	QTRX-MD-01RC-S Reflectance Sensor: 1-Channel, 8mm Wide, RC Output, Low Current, Side-Entry Connector
	ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation
	0.100″ (2.54 mm) Breakaway Male Header: 1×2-Pin, Straight, Black, 100-Pack
	Glideforce GF01-120503-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 2.2kgf, 28mm/s, 30mm Stroke
	QTRXL-MD-01A-S Reflectance Sensor: 1-Channel, 8mm Wide, Analog Output, Long Range, Side-Entry Connector

	Log In \| My Account \| \| Shopping Cart US toll free: 1-877-7-POLOLU ~ (702) 262-6648 Same-day shipping, worldwide
Catalog		Forum		Blog		Support		Ordering		Distributors		About		Contact