Pololu Blog » User Profile: Douglas K. »

Comments by Douglas K.

How I picked our new machines (and what they mean for you!)
- 13 February 2018
very nice article and video. i'm wondering if side a components become either un-soldered or the solder joint becomes in some fashion weaker as a result of the side b pass through the oven?

	QTRXL-MD-01RC-S Reflectance Sensor: 1-Channel, 8mm Wide, RC Output, Long Range, Side-Entry Connector
	Glideforce GF01-121005-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 4.3kgf, 17.6mm/s, 50mm Stroke
	8.4V, 5A Step-Down Voltage Regulator D42V55F8
	Pololu G2 High-Power Motor Driver 24v30 CS
	Pololu Basic 2-Channel SPDT Relay Carrier with 12VDC Relays, Terminal Blocks, and JST SH-Style Top-Entry Connector
	Motoron M3T453 Triple I²C Motor Controller with JST SH-Style Connectors and VIN Terminal Block
	Pololu Basic SPDT Relay Carrier with 5VDC Relay, Terminal Blocks, and JST SH-Style Top-Entry Connector
	Pololu Distance Sensor v2 with Pulse Width Output, 50cm Max, Side-Entry Connector
	ACS37041KLHBLT-030B3 Current Sensor Micro Carrier -30A to +30A, 3.3V
	Pololu RC Switch with Isolated Solid State Relay/Switch, SPST, 60V, 6A (Soldered Connectors)

	Log In \| My Account \| \| Shopping Cart US toll free: 1-877-7-POLOLU ~ (702) 262-6648 Same-day shipping, worldwide
Catalog		Forum		Blog		Support		Ordering		Distributors		About		Contact