Pololu Blog » User Profile: Claire »
Comments by Claire
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
|
Log In
|
My Account
|
Log Out
|
Shopping Cart
US toll free: 1-877-7-POLOLU ~
(702) 262-6648 |
|||||||||||||||
| Catalog | Forum | Blog | Support | Ordering | Distributors | About | Contact | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
New product: G2 High-Power Motor Driver 24v13
- 21 December 2015Hi, NATTHAPONG.
The G2 High-Power Motor Driver 24v13 can be used at 100kHz with locked-antiphase control. Whether a heat sink is needed for your application will depend on your motor and the load you put on it. However, the specifications we give on the driver's product page are for operation at ambient room temperature without a heat sink.
-Claire
Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
- 1 October 2015Hi, Pierre.
The video has captions that you can turn on by clicking the CC symbol in the bottom right corner of the video's pop-up user interface. You can also access different settings for the captions (like different languages) by clicking the gear symbol to the right of the CC symbol. If you want to see all of the captions from the video at once, you could select "Transcript" from the "More" menu which can be found just above the video's description if you are viewing the video directly on YouTube.
-Claire
New versions of our 500mA D24V5Fx step-down voltage regulators
- 16 September 2015Hi, Philippe.
If you want reverse voltage protection, you should put the diode before the input to the regulator, not on the output. Any diode that can do half an amp and has a reverse voltage rating beyond what you plan to apply should be fine; a schottky type is preferable since it will give you less forward voltage drop.
-Claire
New high-current stepper driver carrier with SPI: AMIS-30543
- 5 August 2015Hi, Paul.
I am glad you are interested in our new AMIS driver carrier. However, blog comments are not an appropriate place for this level of technical help.
I noticed that you also posted about this topic on our forum. I recommend continuing the discussion there.
Also, your post was difficult to read with the all your serial monitor outputs, so I removed that portion of your comment. If you have large portions of text like that to share, there are websites that can help with that (e.g. pastebin.com).
-Claire
New high-current stepper driver carrier with SPI: AMIS-30543
- 17 July 2015Hi, Heinz.
The SLA output on the AMIS-30543 is an advanced and complicated feature, so we have no immediate plans to make a beginner example for using it. We appreciate the feedback though, and will keep it in mind.
-Claire
Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
- 17 July 2015Hi, ManBearPig.
I am glad you found the video helpful! We do have a few videos for some of our other products. You can find all of our videos on our Youtube page.
-Claire
New product: LSM303D 3D Compass and Accelerometer Carrier
- 9 June 2015Hi, Cliff.
The only Arduino library we have for the LSM303 is the one you linked to.
It looks like you also posted this question on our forum, which is a better place to discuss technical support matters, and another forum member responded. If you have more questions, please continue the discussion there.
-Claire
New high-current stepper driver carrier with SPI: AMIS-30543
- 26 May 2015Hi, Joe.
We generally prefer metric units, too, but when the standard pin spacing is 0.1", dimensions in inches are generally much nicer. For example, you can immediately tell that a row spacing of 0.7" is breadboard-compatible; can you easily tell if a spacing of 1.778 cm is breadboard compatible?
-Claire
David's line following robot that learns the course
- 11 May 2015Hi, Dattaraj.
The robot in this post is a custom robot. We do not sell a kit of the parts used in it, but there is a list of most of the components used in this earlier blog post about the robot.
-Claire
Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
- 17 April 2015Thanks, I am glad you liked the video! We would love to hear suggestions for other products or topics you would like to see more videos about.
-Claire