BentoBot

Posted by Paul on 20 December 2012

BentoBot is a robot designed to compete in a Mini Sumo competition. It uses a Zumo chassis, 100:1 micro gear motors, and a TB6612FNG motor controller. Here is a video of BentoBot competing at the 2012 Atlanta Hobby Robotics Club Robot Rally:

See this forum post for more pictures and information about BentoBot.

Featured link: http://forum.pololu.com/viewtopic.php?p=29649#p29616

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

488:1 Metal Gearmotor 20Dx46L mm 12V CB with Extended Motor Shaft
2.5-9V Fine-Adjust Step-Up/Step-Down Voltage Regulator S9V11MA
Free Circuit Cellar magazine December 2017
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3
156:1 Metal Gearmotor 20Dx44L mm 6V CB with Extended Motor Shaft
FEETECH Continuous Rotation Servo FS5106R
Glideforce MD122004-P Medium-Duty Linear Actuator with Feedback: 100kgf, 4" Stroke, 0.58"/s, 12V
Glideforce LACT12-500AL Industrial-Duty Linear Actuator with Acme Drive: 250kgf, 12" Stroke, 0.66"/s, 12V
Glideforce LACT12-1000BPL Industrial-Duty Linear Actuator with Ball Screw Drive and Feedback: 450kgf, 12" Stroke, 0.66"/s, 12V
Glideforce MD122006-P Medium-Duty Linear Actuator with Feedback: 100kgf, 6" Stroke, 0.58"/s, 12V
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors