We have new gyros fresh out of the oven. No, I’m not talking about a Greek dish. I’m talking about our new L3GD20H 3-axis gyro carrier.
One of the most important measures of a rate gyroscope’s performance is the amount of noise in its output, which is indicated by its noise density specification. Too much noise means that the gyro will be prone to spurious indications of rotation, and if the gyro readings are integrated to track orientation, noise will cause the calculation to drift over time.
Although sensor fusion can help compensate for this drift by combining the gyro data with an absolute reference (like magnetometer data), using a lower-noise gyro is likely to be a more effective way to improve orientation tracking accuracy. In that respect, one of the biggest improvements of the L3GD20H over its predecessor is that it has a 60% lower rate noise density (0.011 dps/√Hz compared to 0.03 dps/√Hz on the L3GD20).
In addition to accuracy and stability improvements, the L3GD20H offers other advantages. Its power consumption is lower and its start-up time is much shorter. A wider range of user-selectable output data rates is available, including lower frequencies that are appropriate for human gesture detection, and a data enable (DEN) pin allows readings to be synchronized with external triggers. The L3GD20H makes all of these features available in a smaller package than previous gyros, which has allowed us to design a correspondingly smaller carrier board for it while still keeping it breadboard-friendly. For more information, see the L3GD20H carrier product page.
If you don’t need the latest and greatest, the L3GD20 is still a nice sensor, and it’s a good time to grab one now that we’ve lowered the price of our L3GD20 carrier to only $14.95 until stock runs out.
Post a comment
US toll free: 1-877-7-POLOLU ~