iPhone-controlled 3pi Robot.

Posted by Ryan on 20 July 2010

In this project, a WiFi module is connected to a 3pi robot, allowing it to be controlled by an iPhone. Here is a video of the robot in action:

Featured link: http://forum.pololu.com/viewtopic.php?f=2&t=2816

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

ACS37030LLZATR-040B3 Current Sensor Compact Carrier -40A to +40A, 3.3V
Pololu Distance Sensor with Pulse Width Output, 300cm Max, Side-Entry Connector
APM81815 Step-Down Voltage Regulator Carrier, 3.3V Out
JST PH-Style Cable, 3-Pin, Female-Female, 10cm
Glideforce GF01-121005-1-66 Micro Linear Actuator with Limit Switches: 12V, 4.3kgf, 17.6mm/s, 50mm Stroke
Pololu I²C Isolator with Isolated Power, ISO1640, MIE1W0505BGLVH, 5V/3.3V, 200mA
Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH
ACS37042KLHBLT-010B3 Current Sensor Compact Carrier -10A to +10A, 3.3V
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
ACS37042KLHBLT-010B5 Current Sensor Compact Carrier -10A to +10A, 5V
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors