RoboClaw 2x7A Motor Controller (V5C)

Pololu item #: 3284 144 in stock
Brand: Basicmicro

Price break Unit price (US$)
1 69.95
10 62.96


backorders allowed

The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 7.5 A per channel (15 A peak) and operates up to 34 V.

Alternatives available with variations in these parameter(s): motor channels continuous output current per channel Select variant…

 Description Specs (8) Pictures (5) Resources (3) FAQs (0) On the blog (0) 

Dimensions

Size: 1.7″ × 1.9″ × 0.7″1
Weight: 18 g1

General specifications

Motor channels: 2
Control interface: USB; non-inverted TTL serial (2-way);
RC servo pulses; analog voltage2
Minimum operating voltage: 6 V
Maximum operating voltage: 34 V
Continuous output current per channel: 7.5 A
Peak output current per channel: 15 A

Notes:

1
Not including the case.
2
Available baud rates range from 2400 to 460800 bps.

Related Products

Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
Case with Fan for RoboClaw 2x15A, 2x30A, and 2x45A
Tamiya Plug with 10cm Leads, Female
Tamiya Plug with 10cm Leads, Male
T Connector Male-Female Pair
XT60 Connector Male-Female Pair, Black
XT60 Connector Male-Female Pair, Yellow

Related Categories

RoboClaw Motor Controllers
MCP Advanced Motor Controllers
Motors and Gearboxes
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Pololu Jrk Motor Controllers with Feedback
Pololu Simple Motor Controllers
Development Boards (Programmable Controllers)
Arduino
RC Interface
Wild Thumper All-Terrain Chassis
Chassis
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors