Hakko TRR-58-G CHP 6-1/4 in. Macro Flush Cutter
The Hakko TRR-58-G is a sturdy flush diagonal cutter made from 3mm-thick steel and rated for use with up to 10 AWG copper wire.
|Description||Specs (0)||Pictures (2)||Resources (0)||FAQs (0)||On the blog (1)|
These general-purpose flush diagonal cutters from Hakko are made from 3mm-thick steel. They are very sturdy and rated for use with up to 10 AWG copper wire. We also carry the Hakko CHP-170 Cutter, which is 2.5 mm thick and rated for use with up to 16 AWG copper wire.
The diagram below shows the dimensions (in mm) of the Hakko TRR-58-G CHP 6-1/4 in. Macro Flush Cutter.
Note: This product is Hakko item number TRR-58-G
People often buy this product together with:
|Hakko CHP-170 5-1/4 in. Micro Flush Cutter|
|Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG|
|Female Crimp Pins for 0.1" Housings 100-Pack|