Hakko CHP-170 5-1/4 in. Micro Flush Cutter

Pololu item #: 2791
Brand: HAKKO
Status: Discontinued at Pololu 
RoHS 3 not applicable

This product has been discontinued.

The Hakko CHP-170 flush diagonal cutter is made from 2.5mm-thick steel and rated for use with up to 16 AWG copper wire.

 Description Specs (0) Pictures (2) Resources (0) FAQs (0) On the blog (1) 

These general-purpose flush diagonal cutters from Hakko are made from 2.5mm-thick steel. They are rated for use with up to 16 AWG copper wire. We also carry the Hakko TRR-58-G Cutter, which is 3 mm thick and rated for use with up to 10 AWG copper wire.

The diagram below shows the dimensions (in mm) of the Hakko CHP-170 Cutter.

Note: This product is Hakko item number CHP-170.

People often buy this product together with:

0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack 0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack
Wire Stripper 20-30 AWG Solid (22-32 AWG Stranded) Wire Stripper 20-30 AWG Solid (22-32 AWG Stranded)
Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG

Related Products

Hakko TRR-58-G CHP 6-1/4 in. Macro Flush Cutter
Hakko PN-2002 CHP 5-7/8 in. Needle Nose Pliers
Wire Stripper 10-20 AWG Solid (12-22 AWG Stranded)
Wire Stripper 20-30 AWG Solid (22-32 AWG Stranded)

Related Categories

Hand Tools
Stranded Wire
Electronics Prototyping
Educational Kits
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors