MPL115A1 Barometric Pressure Sensor Breakout Board

MPL115A1 Barometric Pressure Sensor Breakout Board
Pololu item #: 1617 0 in stock

This product has been discontinued.

This product has been replaced by the LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator.

The MPL115A1 is a MEMS digital barometer that takes barometric pressure readings with a range of 50 to 115 kPa and an accuracy of ±1 kPa and provides the results over an SPI interface. This sensor also doubles as a temperature sensor that operates from -40 to 105 °C. The breakout board’s pins are spaced 0.1" apart making it easy to use with standard breadboards and 0.1" perfboards.

 Description Specs (6) Pictures (3) Resources (4) FAQs (0) On the blog (0) 

Related Products

LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
BMP085 Barometric Pressure Sensor Breakout Board
HIH-4030 Humidity Sensor Carrier
MLX90614ESF-AAA Infrared Temperature Sensor 90° FOV
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x7-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x7-Pin 10-Pack

Related Categories

Premium Jumper Wires
Sensors
Wires with Pre-crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors