60×8mm Pololu Wheels

Products in category “60×8mm Pololu Wheels”

Pololu item #: 1420
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These black plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.

Pololu item #: 1421
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These red plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.

Pololu item #: 1422
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These yellow plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.

Pololu item #: 1423
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These blue plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.

Pololu item #: 1424
Brand: Pololu
Status: Active and Preferred 
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These white plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our mini plastic gearmotors, to make a nice drive solution for small robots. The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs. The wheels are sold in pairs.

New Products

Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
156:1 Metal Gearmotor 20Dx44L mm 6V CB with Extended Motor Shaft
Pololu Dual G2 High-Power Motor Driver 24v18 Shield for Arduino
250:1 Metal Gearmotor 20Dx46L mm 12V CB with Extended Motor Shaft
313:1 Metal Gearmotor 20Dx46L mm 6V CB with Extended Motor Shaft
Pololu Dual G2 High-Power Motor Driver 18v22 for Raspberry Pi (Partial Kit)
2.5-9V Fine-Adjust Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11MACMA
Pololu Dual G2 High-Power Motor Driver 18v18 for Raspberry Pi (Assembled)
5V Step-Up/Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff S9V11F5S6CMA
25:1 Metal Gearmotor 20Dx41L mm 12V CB with Extended Motor Shaft
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors