|
0.100″ (2.54 mm) Breakaway Male Header: 1×4-Pin, Right Angle, Black, 50-Pack |
|
MP6603 Stepper Motor Driver Carrier |
|
0.100″ (2.54 mm) Breakaway Male Header: 1×2-Pin, Straight, Black, 100-Pack |
|
24V, 8A Step-Down Voltage Regulator D42V110F24 |
|
Pololu Distance Sensor v2 with Pulse Width Output, 50cm Max, Side-Entry Connector |
|
QTRX-MD-01RC-S Reflectance Sensor: 1-Channel, 8mm Wide, RC Output, Low Current, Side-Entry Connector |
|
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH |
|
ACS37042KLHBLT-010B3 Current Sensor Micro Carrier -10A to +10A, 3.3V |
|
Isolated DC-DC Power Module, UCC33420, 5V/5.5V, 300mA |
|
Glideforce GF01-122110-1-66 Micro Linear Actuator with Limit Switches: 12V, 8.1kgf, 6mm/s, 100mm Stroke |
Brandon's mini sumo robot: Black Mamba
- 31 December 2015Hello, Brandon.
Yes, i am asking about robot turning. Thanks for your appreciation Brandon.
Brandon's mini sumo robot: Black Mamba
- 28 December 2015Hello,
Very nice product, can we also rotate it left and right?
The Purdue Tuggiteers' spring 2015 senior design project
- 14 December 2015wow, it's really amazing, which controller is used in it? and what is the cost of it and which components is used in it?