|
Glideforce GF01-120503-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 2.2kgf, 28mm/s, 30mm Stroke |
|
0.100″ (2.54 mm) Breakaway Male Header: 1×4-Pin, Right Angle, Black, 50-Pack |
|
Pololu Digital Distance Sensor, 25cm, Side-Entry Connector |
|
Pololu Basic 2-Channel SPDT Relay Carrier for "Sugar Cube" Relays with JST SH-Style Top-Entry Connector |
|
ACS37030LLZATR-040B3 Current Sensor Compact Carrier -40A to +40A, 3.3V |
|
Pololu RC Switch with Isolated Solid State Relay/Switch, SPST, 60V, 6A |
|
12V, 9A Step-Down Voltage Regulator D42V110F12 |
|
JST PH-Style Cable, 2-Pin, Female-Female, 25cm |
|
Motoron M3T453 Triple I²C Motor Controller with 0.1"-Pitch Through-Holes (No Headers) |
|
Breakout for JST SH-Style Connector, 3-Pin Male Side-Entry (2-Pack) |
New product: CH Robotics UM7-LT orientation sensor
- 23 May 2019Dear all,
I recently bought UM7. I wish to receive the data using SPI communication. Serial communication seems to work but the SPI communication does not provide sensible data. Can you guys help me out? I can provide further information if required.
Best regards,