|
Motoron M3T453 Triple I²C Motor Controller with JST SH-Style Connectors and VIN Terminal Block |
|
QTRX-MD-01RC-S Reflectance Sensor: 1-Channel, 8mm Wide, RC Output, Low Current, Side-Entry Connector |
|
Glideforce GF01-121005-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 4.3kgf, 17.6mm/s, 50mm Stroke |
|
Glideforce GF01-120505-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 2.2kgf, 28mm/s, 50mm Stroke |
|
8.4V, 5A Step-Down Voltage Regulator D42V55F8 |
|
JST PH-Style Cable with Female Pins for 0.1" Housings, 3-Pin, 75cm |
|
Motoron M3T453 Triple I²C Motor Controller with JST SH-Style Connectors (No VIN Connector) |
|
Breakout for JST PH-Style Connector, 2-Pin Male Top-Entry, with SH |
|
Glideforce GF01-120501-1-66 Micro Linear Actuator with Limit Switches: 12V, 2.2kgf, 28mm/s, 10mm Stroke |
|
CT220RMV-HS5 Contactless Current Sensor Carrier ±15mT/150G |
Brandon's mini sumo robot: Black Mamba
- 31 December 2015Hello, Brandon.
Yes, i am asking about robot turning. Thanks for your appreciation Brandon.
Brandon's mini sumo robot: Black Mamba
- 28 December 2015Hello,
Very nice product, can we also rotate it left and right?
The Purdue Tuggiteers' spring 2015 senior design project
- 14 December 2015wow, it's really amazing, which controller is used in it? and what is the cost of it and which components is used in it?