|
Glideforce GF01-120510-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 2.2kgf, 28mm/s, 100mm Stroke |
|
Motoron M3T453 Triple I²C Motor Controller with JST SH-Style Connectors and VIN Terminal Block |
|
ISO6541 4-Channel Digital Isolator Carrier, 3/1, Default High, Functional Isolation |
|
MPQ6612A Single Brushed DC Motor Driver Carrier (Soldered Connectors) |
|
2.5-9V Adjustable Step-Up/Step-Down Voltage Regulator S9V11E2A |
|
120:1 Mini Plastic Gearmotor HP, Offset 3mm D-Shaft Output, with 12 CPR Encoder, Side Connector |
|
Isolated DC-DC Power Module, UCC33420, 5V/5.5V, 300mA |
|
ISO6520 2-Channel Digital Isolator Carrier, 2/0, Default High, Functional Isolation |
|
APM81815 Step-Down Voltage Regulator Carrier, 5.35V Out |
|
20.4:1 Metal Gearmotor 25Dx65L mm HP 24V with 48 CPR Encoder |
Big price reductions and new options for our popular stepper motor drivers
- 27 September 2014Hi Jan,
We had the same problem with the THT components and we bought a wave soldering machine last month, after some research what is the best solution.
http://youtu.be/kciPI46m_wI
You can cover the SMD parts with a peel able soldering mask or frame, so that the soldering wave do not get contact with the parts.
If you have some questions you can contact me via eMail.