|
JST SH-Style Cable, 2-Pin, Single-Ended Female, 12cm |
|
Breakout for JST SH-Style Connector, 2-Pin Male Top-Entry (2-Pack) |
|
Pololu Basic SPDT Relay Carrier with 5VDC Relay, Terminal Blocks, and JST SH-Style Top-Entry Connector |
|
MPQ6612A Single Brushed DC Motor Driver Carrier |
|
Glideforce GF01-120501-1-66 Micro Linear Actuator with Limit Switches: 12V, 2.2kgf, 28mm/s, 10mm Stroke |
|
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block, 240VRMS Jumper) |
|
3.3V, 600mA Step-Down Voltage Regulator D24V7F3 |
|
CT220BMV-HS5 Contactless Current Sensor Carrier ±1.5mT/15G |
|
Pololu Digital Distance Sensor, 100cm, Side-Entry Connector |
|
Pololu Isolated USB-to-I²C Adapter |
Nathan's line following robot: Suckbot
- 7 July 2015Hi, may I ask what were the results of the battery duration with the 500 mAh and 1,300mAh battery?, and it would be interesting to see the robot running, thanks in advance.