|
Pololu High-Power Stepper Motor Driver 36v8 |
|
ACS37041KLHBLT-030B5 Current Sensor Compact Carrier -30A to +30A, 5V |
|
Breakout for JST PH-Style Connector, 3-Pin Male Side-Entry, with SH |
|
CT433-HSWF70MR TMR Current Sensor Compact Carrier -70A to +70A, 3.3V |
|
Pololu Digital Distance Sensor v2, 10cm, Side-Entry Connector |
|
Glideforce GF01-120501-1-66 Micro Linear Actuator with Limit Switches: 12V, 2.2kgf, 28mm/s, 10mm Stroke |
|
Pololu Reverse Voltage Protector, 4-60V, 20A |
|
Breakout for JST SH-Style Connector, 3-Pin Male Side-Entry (2-Pack) |
|
12V, 100mA Step-Down Voltage Regulator D45V1E1F12 |
|
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block, 240VRMS Jumper) |
Understanding battery capacity: Ah is not A
- 26 February 2018I have a project that I am hoping you might help me with.
I have an outdoor lighting project in a remote area, thus I use lights, solar panel, and battery with a solar panel control box.
What I want to know is, do I have the right mix of components to keep the battery charged to use the lights all night long?
Battery: 12V, 35 Amp Duracell
Lights: LED drawing 1.5 amps each (2 of them), and 18Watts
Solar Panel: Pmax, 20W; Vmp, 18.2V, Imp, 1.1A; Voc, 22V, Isc, 1.21A
What I have found thus far is that that after about a week, the battery is no longer able to provide power to the lights. I am using the largest Amp battery that I can fit into the space/housing.
Questions: Obviously, I could reduce the power needs of the lights, or cut back to one light. What is the brightest light that I could use for about 8 hours each night (sun down to sun up) and still be able to charge back up?
Do I need a larger solar panel if I get 6 hours of light a day? 4 hours of light a day?
Thanks, David