|
3pi+ 2040 Robot Kit with 30:1 MP Motors (Standard Edition Kit) |
|
4.2-15V, 3.3A Fine-Adjust Step-Down Voltage Regulator w/ Adjustable Low-Voltage Cutoff D30V33MASCMA |
|
Zumo 2040 Robot (Assembled with 100:1 HP Motors) |
|
Motoron M2U550 Dual Serial Motor Controller |
|
15V, 2.7A Step-Down Voltage Regulator D30V30F15 |
|
DRV8434 Stepper Motor Driver Carrier (Header Pins Soldered) |
|
AltIMU-10 v6 Gyro, Accelerometer, Compass, and Altimeter (LSM6DSO, LIS3MDL, and LPS22DF Carrier) |
|
6V, 3.3A Step-Down Voltage Regulator D30V30F6 |
|
75:1 Micro Metal Gearmotor HP 6V with 12 CPR Encoder, Side Connector |
|
3pi+ 2040 Robot - Turtle Edition (75:1 LP Motors), Assembled |
New product: 130-size, high-power brushed DC motor
- 9 March 2022Hello, Rick.
This is just a blog post; the product page has technical specifications. We do not have a technical drawing available, but it is consistent with the 130-size standard.
- Patrick
37D gearmotors: helical pinion gear, new 150:1 gear ratio, and performance graphs
- 14 October 2021Hello.
There are CAD models (step files) for all of our 37D gearmotors available on their product pages under the "Resources" tab.
What dimensions are you referring to? If you are seeing discrepancies between the dimensions of motors you got from us to what is in our documentation, please send an email to support@pololu.com with your order information along with pictures that show what you are measuring.
- Patrick
New Pololu distance sensors with digital and pulse width outputs
- 24 February 2021Hello, Joseph.
For the sensors with digital outputs all you need your code to do is read a digital input signal. In Arduino, you could do that with a digitalRead() command.
For the pulse width output version, we provided a simple Arduino example program showing how you could read the sensor on its product page.
- Patrick
New products: Magnetic Encoder Pair Kit with JST SH-type Connectors for Micro Metal Gearmotors
- 5 January 2021Hello, Stephano.
There is basic information about the encoders pinout and installation available in the product page description, but we do not have any instructions for use with specific motor controllers. Also, keep in mind that most motor drivers and controllers do not have built-in support for reading encoders, so you might need to use something else to read those signals.
The comments of this blog post are not great for this type of discussion, but if you need additional help you are welcome to send an email to support@pololu.com or make a post on our forum with a description of what you want to do and links to what components you are considering. We might be able to help you assess whether they are compatible and offer some guidance for how to connect them.
- Patrick
Force and torque
- 10 July 2020Hello, Devin.
How much torque your motor needs is going to depend on how fast you want your three pound load to travel that one foot and various details of your specific setup (e.g. the inertia of your conveyor belt pulleys, how much friction there is in your system, etc.). This blog post might help you characterize your system and what you need more precisely, but I would additionally recommend doing some research to find what parts other people have used in similar projects.
- Patrick
New M3 screw lengths
- 9 July 2020Hello, Andrew.
We do not commit to a specific dimension or tolerance, but I just measured a few units and the height is about 2.3mm.
- Patrick
Sanyo pancake stepper motors with encoders
- 4 June 2020Hello, Jim.
The encoders allows you to measure the stepper motor's output up to a resolution of 4000 CPR, or 0.09 degrees. Actually moving your stepper motor to such precise positions would require you to apply sufficient microstepping properly, with at least a 1/32 microstepping ratio.
- Patrick
Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
- 15 May 2020Hello, Ben,
To power your motor without stepping, all you need to do is enable the driver. The comments section of this blog are not a great setting for troubleshooting, so if you require further assistance, you might consider making a post on our forum:
https://forum.pololu.com/
- Patrick
Video: Setting the Current Limit on Pololu Stepper Motor Driver Carriers
- 6 May 2020The comments of this blog post are not a good setting for troubleshooting. Instead, you might consider making a post about this on our forum:
https://forum.pololu.com/
In your post, I recommend you share more details about your setup (like what driver and power supply you are using) along with pictures that show all your connections, your driver, and how you are measuring VREF.
- Patrick
New product: MP3 Trigger V24
- 24 April 2020Hello, Steve.
That might be possible, but we do not have any specific suggestions for how to go about doing that. You might try searching the internet to see if and how other people have done that, or you could also try contacting the SparkFun to see if they have any suggestions.
- Patrick