Pololu Blog »
Line-following robot and mini-sumo main board from tdrobótica.co
 |
One of our distributors in Colombia, tdrobótica.co, has developed a line-following robot kit and a mini-sumo main board kit.
The first kit includes everything you need to build a sleek line-following robot. It uses an Arduino-compatible A-Star 32U4 Micro as the main controller. It also uses a DRV8833 Dual Motor Driver Carrier, two Pololu micro metal gearmotors, brackets, and a 3/8″ ball caster.
The second kit is also based on the A-Star 32U4 Micro and DRV8833 carrier, and it includes much of the electronics needed to build a custom mini-sumo robot, including a buzzer, a voltage regulator, and an IR receiver for controlling it with a TV remote. It has two DRV8833 carriers, each with their channels paralleled to drive a total of two motors. There are connection points for 7 digital sensors (up to 5 can be analog).
 |
tdrobótica.co’s mini-sumo main board kit. |
|---|
For more information (in Spanish), see the line-following robot kit and a mini-sumo main board product pages.
Related products
-
FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo FT5335M
- 29 March 2017We added the FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo FT5335M to our expanding RC servo selection. This giant-scale digital servo...
-
How to make a Balboa robot balance, part 3: encoders
- 30 March 2017This is the third post in a series about how to make a Balboa 32U4 robot balance. Last week I talked about inertial sensors, especially the gyro....
0 comments
Post a comment
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2024 Pololu Corporation
