Mini Maestro 24 controls a parallel LCD

Posted by Jamee on 23 September 2013

In this video, forum user Dev255 controls a standard (HD44780 parallel interface) 4×20 LCD display with a Mini Maestro 24-Channel USB Servo Controller and displays the value of the potentiometer (converted to a percentage) on the screen. You can find out more about his project and see his Maestro script in his forum post.

Featured link: http://forum.pololu.com/viewtopic.php?f=2&t=7402

0 comments

Post a comment

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

New Products

Hakko FS100-01 Tip Cleaning Paste, 10 g
Screw Terminal Block: 3-Pin, 0.1″ Pitch, Side Entry (3-Pack)
RoboClaw 2x15A Motor Controller (V5)
RoboClaw 2x5A Motor Controller (V5)
0.100" (2.54 mm) Breakaway Male Header: 2×40-Pin, Right Angle
Mini IR Remote Control
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Yellow
Hakko CHP-170 5-1/4 in. Micro Flush Cutter
Hakko TRR-58-G CHP 6-1/4 in. Macro Flush Cutter
Hakko 611 Solder Reel Stand (solder not included)
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors