|
JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (2-Pack) |
|
TB67S581FNG Stepper Motor Driver Carrier (Soldered Header Pins) |
|
JST SH-Style Cable, 4-Pin, Single-Ended Female, 30cm |
|
JST PH-Style Cable with Female Pins for 0.1" Housings, 3-Pin, 75cm |
|
TB67H453FNG Single Brushed DC Motor Driver Carrier |
|
Glideforce GF01-121005-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 4.3kgf, 17.6mm/s, 50mm Stroke |
|
Motoron M3T453 Triple I²C Motor Controller with 0.1"-Pitch Through-Holes (No Headers) |
|
QTRX-MD-01A-S Reflectance Sensor: 1-Channel, 8mm Wide, Analog Output, Low Current, Side-Entry Connector |
|
MP6603 Stepper Motor Driver Carrier |
|
8.4V, 5A Step-Down Voltage Regulator D42V55F8 |
Understanding battery capacity: Ah is not A
- 26 February 2014Follow up. Reason for under. Voltage is weight and space.how powerful a battery should I install? BTW , what happens to ah(amp hour) if I put the batteries in series?
Understanding battery capacity: Ah is not A
- 26 February 2014Hello,
New bee here. I am building an e.v. and my motor states that it is 3.2amps. 90volts. What should my battery specs be if I put 48 volts only? My load should be 200 lbs. Please help.