|
Glideforce GF01-122110-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 8.1kgf, 6mm/s, 100mm Stroke |
|
A89301-Based Sensorless Brushless Motor Controller, 50V, 11A |
|
JST SH-Style Cable, 4-Pin, Single-Ended Female, 12cm |
|
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block) |
|
Glideforce GF01-120510-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 2.2kgf, 28mm/s, 100mm Stroke |
|
JST SH-Style Cable, 4-Pin, Female-Female, 10cm |
|
Breakout for JST PH-Style Connector, 5-Pin Male Side-Entry, with SH |
|
Glideforce GF01-120503-2-66 Micro Linear Actuator with Feedback Potentiometer: 12V, 2.2kgf, 28mm/s, 30mm Stroke |
|
JST PH-Style Cable, 4-Pin, Female-Female, 63cm |
|
Magnetic Encoder Pair Kit with Side-Entry Connector for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V |
New product: CH Robotics UM7-LT orientation sensor
- 23 May 2019Dear all,
I recently bought UM7. I wish to receive the data using SPI communication. Serial communication seems to work but the SPI communication does not provide sensible data. Can you guys help me out? I can provide further information if required.
Best regards,