|
JST SH-Style Cable, 4-Pin, Female-Female, 10cm |
|
ACS37800KMACTR-030B3-I2C Power Monitor Carrier with Secondary I²C Isolation (Soldered Terminal Block, 240VRMS Jumper) |
|
APM81815 Step-Down Voltage Regulator Carrier, 5.35V Out |
|
JST SH-Style Cable, 2-Pin, Female-Female, 25cm |
|
Isolated DC-DC Power Module, MIE1W0505BGLVH, 5V/3.3V, 200mA |
|
5V, 600mA Step-Down Voltage Regulator D24V7F5 |
|
Pololu Digital Distance Sensor v2, 15cm, Side-Entry Connector |
|
Pololu Isolated Solid State Relay/Switch, SPST, 60V, 7A |
|
Breakout for JST PH-Style Connector, 4-Pin Male Top-Entry, with SH |
|
0.100″ (2.54 mm) Breakaway Male Header: 1×2-Pin, Straight, Black, 100-Pack |
Understanding battery capacity: Ah is not A
- 26 February 2014Follow up. Reason for under. Voltage is weight and space.how powerful a battery should I install? BTW , what happens to ah(amp hour) if I put the batteries in series?
Understanding battery capacity: Ah is not A
- 26 February 2014Hello,
New bee here. I am building an e.v. and my motor states that it is 3.2amps. 90volts. What should my battery specs be if I put 48 volts only? My load should be 200 lbs. Please help.