Robot Kits » Zumo Robots and Accessories » Zumo 32U4 OLED Robot »

Zumo 32U4 Front Sensor Array

This is a merged information page for Item #3122.
View normal product page.

Pololu item #: 3122
Brand: Pololu
Status: Active and Preferred 

This is the front sensor array of the Zumo 32U4 robot. It is included as part of the Zumo 32U4 OLED Robot Kit and built into the assembled versions of the Zumo 32U4 Robots. Additional header pins and infrared LEDs are included.

Note: This product is not intended for use with the Zumo 2040 Robot or Zumo Robot for Arduino.

Compare all products in Zumo 32U4 OLED Robot or Original Zumo 32U4 Robot.

Pictures

Zumo 32U4 robot front sensor array with included hardware.

Zumo 32U4 robot front sensor array.

Zumo 32U4 robot front sensor array, bottom view.

Zumo 32U4 robot front sensor array, top view.

Assembled Zumo 32U4 robot, bottom view.

Overview

This sensor array features five downward-facing reflectance sensors for line-following or edge-detection, and it also includes front- and side-facing detectors that work together with IR emitters on the Zumo 32U4 main board to create a proximity sensor system. It is primarily intended as a replacement part, but it can also be used to make your own Zumo 32U4 robot if you only want a subset of the parts included with the full kit.

Included components

The Zumo 32U4 Front Sensor Array includes:

• 2×12 extended male header for sensor array
• two 1×3 right-angle male headers and two shorting blocks – jumpers for sensor array
• two wide-angle and two narrow-angle through-hole infrared LEDs (these plug into the main board and serve as forward emitters for the proximity sensor detectors located on the front sensor array)

Frequently-asked questions

No FAQs available.

On the blog

No blog posts to show.