This is a merged information page for Item #1089.
View normal product page.
Pololu item #:
1089
Brand:
Pololu
Status:
Active and Preferred
This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with the Pololu Wheel 42×19 mm and encoder. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.
Compare all products in Motor Brackets or Brackets for Micro Metal Gearmotors.
 |
Diagram with dimensions of the Pololu micro metal gearmotor bracket extended. |
|---|
 |
Pololu micro metal gearmotor bracket extended with Micro Metal Gearmotor. |
|---|
 |
Pololu micro metal gearmotor bracket extended with Micro Metal Gearmotor. |
|---|
 |
Pololu micro metal gearmotor bracket extended, interior view. |
|---|
 |
Micro Metal Gearmotor with Pololu wheel 42×19mm and extended bracket. |
|---|
 |
Micro Metal Gearmotor and Pololu wheel 42×19mm mounted with extended mounting bracket. |
|---|
 |
Encoder for Pololu wheel 42×19mm with wheel, motor, and bracket. |
|---|
 |
Side view of the encoder for Pololu wheel 42×19mm, mounted to a bracket. |
|---|
 |
Pololu 5" round robot chassis RRC04A with drive components and encoders mounted on top. |
|---|
These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm × 12 mm × 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S), such as our micro metal gearmotors. We also offer shorter versions of these brackets in black plastic and white plastic.
Four #2-56×7/16" screws and four nuts are included.
|
|
|
This extended version of the bracket is designed to allow a portion of the motor to fit within the hub of a larger wheel, such as our Pololu Wheel 42×19mm.
|
Note: This bracket also works with the 1000:1 micro metal gearmotors, but because of its longer gearbox, it does not fully enclose the exposed gears the way it does on the other micro metal gearmotors.
3D model of a Micro Metal Gearmotor and a #1089 bracket.
3D model of a Micro Metal Gearmotor with Extended Motor Shaft and a #1089 bracket.
No FAQs available.
Pololu customer Yvon Hache made this 3D-printed aerial photography rig that he shared in a forum post. The rig, trailing 100 feet below the kite,...
Many of the engineers and robot enthusiasts here at Pololu competed in the LVBots 2015 line following competition. (For house rules and details...
I recently competed in the LVbots line following robot challenge, where I took third place with the fourth fastest robot (due to lucky placement in...
Several Pololu employees made robots for the LVBots dead reckoning competition. Unfortunately, my robot didn’t work enough in time for the...
This PID line follower, originally featured in this Let’s Make Robots post by user Enigmerald, uses our 5" Robot Chassis along with 30:1 MP micro...