This is a merged information page for Item #1083.
View normal product page.
Pololu item #:
1083
Brand:
Pololu
Status:
Active and Preferred
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 6 mm diameter motor shafts. The set includes two hubs, four #4-40 set screws for securing the hubs to motor shafts, and one 0.05″ Allen wrench for use with the set screws. Each hub has six threaded mounting holes for #4-40 screws (not included).
We have an assortment of universal mounting hubs available, spanning several shaft sizes and featuring mounting holes threaded for metric or imperial screws:
Alternatives available with variations in these parameter(s): shaft diameter mounting hole size Select variant…
Compare all products in Pololu Universal Mounting Hubs.
![]() |
37D mm gearmotor (without encoder) with L-bracket and 6mm universal mounting hub. |
---|
![]() |
Black Pololu Wheel 90×10mm on a Pololu 37D mm Metal Gearmotor. |
---|
![]() |
37D mm gearmotor (without encoder) with L-bracket and 6mm universal mounting hub. |
---|
![]() |
37D mm metal gearmotor with 64 CPR encoder (no end cap) and Pololu 90×10mm wheel. |
---|
![]() |
37D mm gearmotor (without encoder) with L-bracket and 6mm universal mounting hub. |
---|
These universal mounting hubs are designed to work with most 6 mm diameter shafts, including round shafts and “D” shafts. Each of the two included hubs has six mounting holes for #4-40 screws (not included), letting you mount custom wheels or mechanisms to your motors. The four included #4-40 hex set screws (two for each hub) allow secure coupling of shaft to hub, with the longer set screws intended for the deeper of the two set screw holes. A 0.05″ hex wrench (often the smallest size in SAE Allen wrench sets) is included for use with the set screws. A dimension diagram of the hub is available under the resources tab.
We have an assortment of hubs available for various shaft sizes and with different mounting hole thread options. Each Universal Mounting Hub is compatible with a variety of our wheels as detailed in the following table:
Pololu Universal Mounting Hubs | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
for 3mm shafts | for 4mm shafts | for 5mm shafts | for 6mm shafts | for 1/4″ shafts | for 8mm shafts | ||||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
||||||||
M3 holes #4-40 holes #2-56 holes |
M3 holes #4-40 holes |
M3 holes #4-40 holes |
M3 holes #4-40 holes |
M3 holes #4-40 holes |
M3 holes |
||||||||
![]() Pololu Wheels for 3mm Shafts |
32×7mm | – | – | – | – | – | – | ||||||
40×7mm | – | – | – | – | – | – | |||||||
60×8mm | – | – | – | ||||||||||
70×8mm | – | – | – | ||||||||||
80×10mm | |||||||||||||
90×10mm | |||||||||||||
![]() Pololu Wheels for Servos |
40×7mm | – | – | – | – | – | – | ||||||
60×8mm | |||||||||||||
70×10mm | – | – | – | ||||||||||
90×10mm | – | – | – | ||||||||||
![]() Pololu Multi-Hub Wheels |
80×10mm | – | – | – |
|
|
Size: | 25.4 mm diameter × 9.2 mm thick |
---|---|
Weight: | 6.8 g1 |
Shaft diameter: | 6 mm |
Mounting hole size: | #4-402 |
Printable mechanical drawing for the Pololu universal aluminum mounting hub for 6mm shaft, #4-40 holes.
No FAQs available.
Our Halloween sale is still going strong! Visit the sale page for more information, and if you are in need of some inspiration, check out our...
Forum user Hardsuit posted in this thread about the hub adapters he 3D printed for his robot, which is a roughly 1/4 scale RC Tachikoma from the...