Arduino Leonardo

Pololu item #: 2192
Brand: Arduino
Status: Discontinued at Pololu 
RoHS 3 status: supplier unspecified

This product has been discontinued.

Please consider our Arduino-compatible A-Star 32U4 Prime controllers as alternatives.

The Arduino Leonardo is a microcontroller board based on the ATmega32U4. It has 23 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started (USB cable and power supply are not included). This board ships with the female header pins soldered in, as shown in the product picture.

 Description Specs (11) Pictures (4) Resources (13) FAQs (0) On the blog (2) 

Arduino Leonardo, top view.

Arduino Leonardo, bottom view.

Note: There are differences between the Leonardo and previous Arduino boards. As such, there could be incompatible Arduino shields and libraries. The Leonardo works with our motor and robot shields, and it works with our Wixel shield in a limited capacity: the wireless serial features work, but the wireless reprogramming does not.

Overview

The Arduino Leonardo is a microcontroller board based on the ATmega32U4. It has 23 digital input/output pins (of which 7 can be used as PWM outputs and 12 can be used as analog inputs), a 16 MHz crystal, a USB connection, a power jack, an in-circuit system programming (ICSP) header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a Micro USB cable or power it with a AC-to-DC adapter or battery to get started (USB cable and power supply are not included). This board ships with the power jack and through-hole headers soldered in, as shown in the product picture.

The Leonardo differs from all preceding Arduino boards in that the user-programmable ATmega32U4 AVR microcontroller has built-in USB functionality, eliminating the need for a secondary processor. This makes the Leonardo more versatile: in addition to supporting a virtual (CDC) serial/COM port interface, it can appear to a connected computer as a mouse and keyboard. See Arduino’s getting started page for more implications of the Leonardo’s single-MCU design.

The Arduino has a large support community and an extensive set of support libraries and hardware add-on “shields” (e.g. you can easily make your Arduino wireless with our Wixel shield), making it a great introductory platform for embedded electronics. Note that we also offer a SparkFun Inventor’s Kit, which includes an Arduino Uno along with an assortment of components (e.g. breadboard, sensors, jumper wires, and LEDs) that make it possible to create a number of fun introductory projects.

More information about the Arduino Leonardo is available on Arduino’s website. Note that the Leonardo only works with the Arduino IDE version 1.0.1 or later.

Warning: We recommend not connecting the Arduino to USB while it is powered through VIN. See this forum post for more information.

Choosing the right controller

The table below compares the Arduino Uno, Leonardo, and our A-Star 32U4 Prime controllers. The A-Star Primes are based on the same ATmega32U4 AVR microcontroller as the Leonardo and ship with Arduino-compatible bootloaders, so they can be used a direct substitutes for the Leonardo in typical applications. The Primes also offer many advantages, including superior power management that enables efficient operation from 2.7 V to 11.8 V (LV version) or 5 V to 36 V (SV version).


Arduino Uno R3

Arduino Leonardo

A-Star 32U4 Prime LV

A-Star 32U4 Prime SV
Microcontroller: ATmega328P ATmega32U4 ATmega32U4
Clock: 16 MHz resonator 16 MHz crystal 16 MHz crystal
User I/O lines: 20 23 26
PWM outputs: 6 7 7
Analog inputs: 6 12 12
Ground access points: 4 4 43
User LEDs: 3 3 3
User pushbuttons: 3
Reset button: yes yes yes
Power switch:     yes
Buzzer option:     yes
microSD option:     yes
LCD option:     yes
Arduino-compatible
bootloader:
yes yes yes
USB connector: B Micro-B Micro-B
USB/regulator
power selection:
partial partial TPS2113A
High-performance
reverse-voltage
protection:
    yes
Recommended
input voltage:
7 V to 12 V 7 V to 12 V 2 V to 16 V 5 V to 36 V
Regulator type (5 V): linear linear switching
step-up/step-down
switching
step-down
Available
5 V
output
current:
at 3 V in 0.75 A
at 5 V in 1.5 A 0.2 A
at 7 V in 1.0 A 1.0 A 1.9 A(1) 1.0 A
at 9 V in 0.5 A 0.5 A 1.9 A(1) 1.0 A
at 11 V in 0.35 A 0.35 A 1.8 A 1.0 A
at 24 V in 1.0 A
via USB
connector
0.5 A(2) 0.5 A(2) 1.9 A(3) 1.9 A(3)
Weight: 28 g 20 g 13 g to 33 g
Price: $27.60 $24.95 $24.95 to $39.95
1 There is more available 5 V output current via VREG, see maximum regulator output current graph for details.
2 With sufficient USB power supply.
3 Nominal current available through power MUX with sufficient USB power supply.

Side-by-side comparison of the A-Star 32U4 Prime LV microSD to the Arduino Leonardo.

We also carry a variety of other programmable controllers, from the beginner-friendly BASIC Stamp to the far more capable mbed and Raspberry Pi boards, which are based on powerful ARM processors. Our full selection can be found in our Programmable Controllers category.

People often buy this product together with:

Sharp/Socle GP2Y0A21YK0F Analog Distance Sensor 10-80cm Sharp/Socle GP2Y0A21YK0F Analog Distance Sensor 10-80cm
Zumo Reflectance Sensor Array Zumo Reflectance Sensor Array
75:1 Micro Metal Gearmotor HP 6V 75:1 Micro Metal Gearmotor HP 6V

Related Products

Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
Wall Power Adapter: 9VDC, 1A, 5.5×2.1mm Barrel Jack, Center-Positive
A-Star 32U4 Mini ULV
A-Star 32U4 Mini LV
A-Star 32U4 Mini SV
A-Star 32U4 Prime LV microSD
A-Star 32U4 Prime SV microSD
A-Star 32U4 Micro
Arduino Micro
Pololu 9V, 1A Step-Down Voltage Regulator D24V10F9
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu Dual MC33926 Motor Driver Shield for Arduino
Pololu DRV8835 Dual Motor Driver Shield for Arduino
Pololu A4990 Dual Motor Driver Shield for Arduino
Wixel Shield for Arduino, v1.1
Wixel Shield for Arduino, v1.1
SparkFun Starter Kit for Arduino-Compatible RedBoard
Premium Jumper Wire 50-Piece 10-Color Assortment M-M 12"
Baby Orangutan B-328 Robot Controller
Zumo Robot for Arduino (Assembled with 75:1 HP Motors)
Wires with Pre-Crimped Terminals 50-Piece 10-Color Assortment M-M 12"
Pololu USB AVR Programmer v2.1
Stackable 0.100" Female Header Set for Arduino Shields

Related Categories

Arduino-Compatible
Shields for Arduino
A-Star Programmable Controllers
Development Boards (Programmable Controllers)
Male-Male Premium Jumper Wires
Male-Female Premium Jumper Wires
Wires with Pre-Crimped Terminals
Solderless Breadboards
Sensors
Regulators and Power Supplies
Audio
LEDs
Switches, Buttons, and Relays
Pololu RP5/Rover 5 Expansion Plates
Pololu 5″ Robot Chassis RRC04A
Signal Adapters and Extenders
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors