Compare all products in this category
|
|
|
|
This tiny LED bar features 12 bright LEDs spanning the colors of the rainbow (red, orange, yellow, yellow-green, green, blue, violet, pink, warm white, and white). Each LED is controlled by a separate transistor and has its own appropriate current-limiting resistor, so only simple (and low power) high and low digital signals are required to turn each LED on and off. Bring your project to life with this colorful LED bar!
|
|
|
|
|
|
|
The ShiftBrite is an RGB LED module with a built-in driver featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBrite modules can be easily chained together and controlled from a single microcontroller to create large LED displays. This configuration comes with male header pins soldered in.
|
|
|
|
|
|
|
The ShiftBrite is an RGB LED module with a built-in driver featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBrite modules can be easily chained together and controlled from a single microcontroller to create large LED displays. This configuration comes with no header pins.
|
|
|
|
|
|
|
The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a single microcontroller to create large LED displays.
|
|
|
|
|
|
|
The Satellite Module 001 is an RGB LED module by macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration.
|
|
|
|
|
|
|
The Parallax ColorPAL combines an RGB LED, a light sensor, and a microcontroller to make a color sensor that can also be used as an ambient light detector and a color generator. Readings are reported via a 1-wire asynchronous serial interface.
|
|
|
|
|
|
|
This multi-color LED contains red, green, and blue elements that can be mixed to produce any color. Unlike many other RGB LEDs, this unit has a diffused white lens that blends the colors without any additional diffusers or reflectors.
|
|
|
|
|
|
|
This is a basic, general-purpose blue LED in a standard T1 (3mm) package with 0.1" lead spacing.
|
|
|
|
|
|
|
This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.
|
|
|
|
|
|
|
This is a basic, general-purpose green LED in a standard T1 (3mm) package with 0.1" lead spacing.
|
|
|
|
|
|
|
This is a basic, general-purpose yellow LED in a standard T1 (3mm) package with 0.1" lead spacing.
|
|
|
|
This product has been discontinued.
|
|
|
These super-bright, white LEDS are a great addition to any robotics or electronics project.
|
|
|
|
This product has been discontinued.
|
|
|
These brilliant blue LEDS are a great addition to any robotics or electronics project.
|
|
|
|
|