BMP085 Barometric Pressure Sensor Breakout Board

Pololu item #: 1646

This product has been discontinued.

This product has been replaced by the LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator.

This is a simple breakout board from SparkFun for the BMP085 high-precision, low-power barometric pressure sensor. The BMP085 offers a measuring range of 30 to 110 kPa with an absolute accuracy of down to 0.1 kPa. It uses piezo-resistive technology for robustness, accuracy and linearity as well as long term stability. This sensor supports a voltage supply between 1.8 and 3.6VDC. It is designed to be connected directly to a microcontroller via an I²C bus.

 Description Specs (5) Pictures (3) Resources (5) FAQs (0) On the blog (0) 

Discontinuation Notice: This product has been replaced by the LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator.

Overview

This is breakout board for the BMP085 from SparkFun is a high-precision, low-power barometric pressure sensor. The BMP085 offers a measuring range of 30 to 110 kPa with an absolute accuracy of down to 0.1 kPa. It uses piezo-resistive technology for robustness, accuracy and linearity as well as long term stability. This sensor supports a voltage supply between 1.8 and 3.6VDC. It is designed to be connected directly to a microcontroller via an I2C bus.

The breakout board’s pins are spaced 0.1" apart making it easy to use with standard breadboards and 0.1" perfboards. The analog and digital supplies (VDDD and VDDA) of the BMP085 are tied together and broken out to a single pin. The I²C lines are pulled high with 4.7kΩ resistors.

Specifications and Features

  • Dimensions: 0.6" × 0.6" (15.24 × 15.24 mm)
  • 1.8 to 3.6 V supply voltage
  • 30 to 110 kPa pressure range
  • 1 Pa pressure resolution of output data
  • Digital two wire (I²C) interface
  • Factory-calibrated with calibration values stored in EEPROM
  • Temperature measurement included

Note: SparkFun calls this product the “Barometric Pressure Sensor – BMP085 Breakout,” SKU: SEN-11282.

People often buy this product together with:

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black 0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
HIH-4030 Humidity Sensor Carrier HIH-4030 Humidity Sensor Carrier

Related Products

LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
HIH-4030 Humidity Sensor Carrier
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
0.100" (2.54 mm) Female Header: 1x6-Pin, Straight
0.1" (2.54mm) Crimp Connector Housing: 1x6-Pin 10-Pack

Related Categories

Premium Jumper Wires
Sensors
Wires with Pre-Crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors