Pololu High-Power Motor Driver 18v15

Pololu item #: 755
Brand: Pololu supply outlook
Status: Not Recommended for New Design 
RoHS 3 compliant

Price break Unit price (US$)
1 49.95


backorders allowed

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.3×0.8-inch board supports a wide 5.5 to 30 V voltage range and is efficient enough to deliver a continuous 15 A without a heat sink.

 Description Specs (10) Pictures (4) Resources (6) FAQs (1) On the blog (1) 

Dimensions

Size: 1.3" x 0.8"
Weight: 2.8 g1

General specifications

Motor channels: 1
Minimum operating voltage: 5.5 V
Maximum operating voltage: 30 V
Continuous output current per channel: 15 A2
Maximum PWM frequency: 40 kHz3
Maximum logic voltage: 5.5 V
MOSFET on-resistance (max per leg): 3.5 mΩ
Reverse voltage protection?: N

Notes:

1
Without any connectors or through-hole capacitors.
2
Typical results with 100% duty cycle at room temperature. Continuous current can be as high as 21 A if the MOSFETs are kept cool with air flow or a heat sink.
3
Higher frequencies are possible, but duty cycle will be limited by dead time of approximately 3 μs per cycle.

Related Products

Pololu G2 High-Power Motor Driver 18v17
Pololu G2 High-Power Motor Driver 18v25
Pololu G2 High-Power Motor Driver 24v13
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Simple High-Power Motor Controller 18v15
Pololu Simple High-Power Motor Controller 18v25
Pololu High-Power Motor Driver 18v25 CS
Pololu High-Power Motor Driver 36v9
VNH5019 Motor Driver Carrier
Pololu Dual VNH5019 Motor Driver Shield for Arduino

Related Categories

Pololu High-Power Motor Drivers
Pololu Simple Motor Controllers
Brushed DC Motor Drivers
Brushed DC Motor Controllers
Motors and Gearboxes
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors