Mechanical Components » Wheels, Tracks, and Ball Casters » Solarbotics Wheels »
Solarbotics GM10 1" Wheel Black
 
|
These 1" plastic wheels are made specifically for the Solarbotics GM10 Geared Pager Motor output shaft. Each wheel comes with a pair of black rubber bands for a tire (and a spare).
| Description | Pictures (1) | Resources (0) | FAQs (0) |
|---|
  |
The GM10W wheels are made to match the Solarbotics GM10 Geared Pager Motor. These plastic wheels are molded from ABS, and they measure just under 1" across by 0.22" wide. With the included rubber bands, the total wheel diameter is 1". The wheels are available in red, blue, black, white, and yellow.
To mount this wheel to a GM10 Geared Pager Motor, you will need to remove the motor’s included output shaft arm and centering spring. To make room for the wheel, you will also need to cut/break off the thin plastic rod that the centering spring clips to. Removing the arm exposes a 0.190" round shaft that is 0.125" long; the last 0.050" of the shaft is a square with 0.140" sides that seats into these wheels.
Note: These wheels do not come with any mounting hardware, instructions, or packaging.
